7″ Ultra-Thin Cutting Disc
Ultra-Thin Metal Cutting Disc
A specialist 180 mm ultra-thin cutting disc for stainless steel and metal. The 1 mm profile creates a narrow cutting path, while the 7-inch diameter provides extended reach for controlled straight cutting of sheet, thin-wall tube and fabricated sections.
180 mm
1 mm
22 mm
Product Overview
A specialist 180 × 1 × 22 mm ultra-thin cutting disc designed to combine extended reach with a narrow cutting path for controlled straight cutting.
01
Extended 180 mm Reach
The 7-inch diameter provides greater working reach across suitable sheet, tube and fabricated components.
02
Ultra-Thin 1 mm Profile
The slim wheel profile keeps the cutting path narrow and limits unnecessary material removal.
03
Fiberglass-Reinforced Construction
Integrated fiberglass reinforcement supports the resin-bonded wheel during correctly mounted and properly aligned straight-line cutting.
04
Efficient Abrasive System
Selected aluminum oxide grains and an optimized resin-bond system support efficient cutting action, while vacuum-controlled mixing promotes uniform batch construction.
Handling Guide
Large-Diameter Ultra-Thin Wheel Handling
This specialist specification requires careful machine matching, workpiece control and straight-line operation.
Confirm Machine Compatibility
Use only with equipment approved for 180 mm wheels and the correct arbor configuration.
Secure the Workpiece
Clamp the workpiece to reduce vibration, movement and pinching during cutting.
Maintain Straight Alignment
Enter the workpiece squarely and maintain a controlled straight cutting line.
Avoid Side Loading
Do not twist, pry, make curved cuts or use the disc face for grinding.
Applications
Typical Ultra-Thin Cutting Applications
Designed for controlled straight cutting with compatible guarded 180 mm equipment.
Sheet Trimming
Long straight trimming on suitable stainless steel and metal sheet.
Thin-Wall Tube
Cross-cutting larger thin-wall tube where a narrow kerf is preferred.
Fabricated Profiles
Cutting light fabricated sections and profiles requiring extended wheel reach.
Controlled Workshop Cutting
Straight cutting applications performed by trained operators using compatible guarded equipment.
Technical Data
Technical Specifications
| Brand | KELIEF |
|---|---|
| Size | 180 × 1 × 22 mm |
| Outer Diameter | 180 mm (7″) |
| Thickness | 1 mm (0.039″) |
| Bore Size | 22 mm |
| Maximum Operating Speed | 80 m/s |
| Suitable Materials | Stainless Steel & Metal |
| Bond | Resin Bond |
| Reinforcement | Fiberglass Reinforcement |
| Manufacturing Process | Vacuum-Controlled Abrasive Mixing |
| Standard Packing | 200 pcs/carton |
| Customization | OEM / ODM |
Specialist Positioning
Extended Reach with a Narrow Kerf
The 180 × 1 mm specification is positioned as a specialist large-diameter ultra-thin wheel rather than a general-purpose cutting disc.
Extended Reach
The 180 mm diameter reaches farther into suitable workpieces than smaller cutting wheels.
Narrow Cutting Path
The 1 mm wheel profile limits kerf width and material removal.
Specialist Application
Designed for applications where both large diameter and an ultra-thin wheel profile are specifically required.
Controlled Operation
Correct machine matching, alignment and workpiece support are particularly important for this specification.
OEM & Packaging
Private-Label Ultra-Thin Cutting Discs
For this specialist specification, KELIEF OEM projects should begin with the intended machine, cutting application and destination market. Standard packing for this model is 200 pieces per carton.
Need 180 × 1 × 22 mm Ultra-Thin Cutting Discs?
Send us your intended machine, cutting application, required quantity and packaging requirements for a matched KELIEF quotation and OEM proposal.